Product application:
Hot Drinks Cup Lid with Snap Fit
Main parameters of mold:
| Item | Material |
| Raw Material | Sugarcane Bagasse Pulp or mixed with bamboo pulp or wheat straw pulp |
| Product thickness(mm) | 0.4-0.6 (depending on the quality requirement) |
| Color | Bleached or Unbleached (depending on the quality requirement) |
| Certification | OK-compost, FDA, BRC |
| Procedure for Cup lid fitting | * Add hot coffee/tea to fill cup approx. ¾ full. * Press on the lid – with two hands evenly place on the lid, press the lid in place on the cup. Report if you heard an audible snap sound during the lid application (snap or no snap). * Twist the lid to make sure it is secure and does not come off. * Tilt the cup over the sink at an angle of 45 degrees and up to 90 degrees for approx. 15 seconds to see if any of the hot contents come out (leak). Make sure the sip hole on the lid is aligned at the opposite end of the cup seam (If aligned with cup seam, it might leak-normal). * Be sure to change lids after 3 usages as lids wear out over a few usages. |
Keywords: molded fiber food packaging Snap Fit Lid Coffee Cup Lid
